Prima Power Fibre Laser, Fabrication & Workshop Equipment – Surplus to Requirements of a Metalwork Manufacturer
Starts: 04 August 2026 at 10:45 BST
Ends: 15 September 2026 at 15:00 BST
Featuring a 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine, Kingsland Multi 70 Hydraulic Universal Steelworker, Samsung SF20L LPG Forklift, Mega BS-250HAS Automatic Horizontal Bandsaw With Roller Conveyors. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 48 of 48 lots
- LOT 1
![site]()
2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI
With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. - LOT 2
![site]()
Kingsland Multi 70 Hydraulic Universal Steelworker
Punching- Rated Capacity 70 Ton. Maximum Capacity 26 x 20mm. Diameter x Thickness 57 x 9mm. Stroke Length 55mm. Cycle/Min (20mm Stroke) 34. Standard Throat 305mm. Working Height 1,030mm. Shearing- Flat Bar - Max Thickness 300 x 20mm. Flat Bar - Max Width 375 x 15mm. Angle Flange Trim - 45° 100 x 15mm. Working Height 890mm. Flat Bar - Max Thickness 300 x 20mm. Flat Bar - Max Width 375 x 15mm. Angle Cutting- 90° Cut 130 x 13mm, 45° Cut 70 x 10mm. Working Height 1,130mm. Notching- Material Thickness 10mm. Width - Rectangle 45mm. Depth - Rectangle 90mm. Depth - Vee 60mm. Angle Flange - Max Profile 100 x 10mm. Working Height 890mm. Section Cutting Round 45mm. Square 45mm. Channel 130 x 65mm. Tee 90 x 12mm. Corner Notching-Maximum Capacity 250 sq x 6mm. Tube Notching- Max Outside Diameter 83mm. Bending- Max Bar Bending 250 x 13mm. Max Sheet Bending 500 x 3mm. Punching At Notch Station Throat Depth 125mm. Maximum Capacity 38 x 8mm. Motor Power 5.5 kW. S/No. 365103. - LOT 3
![site]()
Kingsland 60 XA Hydraulic Universal Steelworker
Capacity 60 Ton. Punching Ø28mm Thru 15mm Thick. Throat Depth 200mm. Angle Cutting 120 x 120 x 12mm At 90° Or 80 x 80 x 8mm At 45° . Shearing 300 x 15 Or 200 x 20mm. Notching 100 x 42 mm x 10mm. Rounds 40mm, Square Bar 35mm. S/No. 106498. - LOT 4
![site]()
Mega BS-250HAS Automatic Horizontal Bandsaw With Roller Conveyors
Cutting Capacity At 90° Solid Round 260mm, Solid Rectangle 300 x 180mm, Solid Square 280 x 250mm. Blade Dimension 3,660 × 34 × 1.1mm. Blade Speed 25-80m/min. Variable Feed Override. Motor Power 2.2kW. Voltage 400V. S/No. 970305 (1997). - LOT 5
![site]()
Bridgeport Turret Milling Machine With Sony 2 Axis DRO
Longitudinal Table Travel Approx 736mm. Cross Travel Approx 304mm. Vertical Travel (Knee) Approx 400mm. Quill Travel 125mm. Ram Travel Approx 315mm. Spindle Centre to Column Face: Minimum Distance Approx 170mm - Max Approx 476mm. Spindle To Table Approx 64mm Min - 470mm Max. Table to Spindle Nose Gauge Line Approx 55mm. Max Workpiece Weight Approx 340kg. Table Dimension Approx 1,067mm x 227mm (3 'T' Slots). R8 Taper. Speed Range 50-3,750rpm. Right Hand & Left Hand Head Tilt = 90° Forward & Backward Head Tilt = 45°. Power Feed. S/No. 199671074S. - LOT 6
![site]()
Nargesa MT150R Cold Forging & Scroll Bending Machine
Twisting Capacity Up To 20mm Square Bar, Flat Bar Capacity (Twist/Bend) Up To 35 x 8mm Or 35 x 10mm. Bending/Scroll Capacity Handles Various Profiles Including Round, Square & Flat Bars With Quick-Change Dies. Motor Power: 0.37kW / 0.5 HP (230V). S/No. 07301502 (2000). - LOT 7
![site]()
Geka Minicrop
Tonnage Pressure 45 Tonnes. Punch Throat Depth 175mm. Punch Capacity Ø27mm Through 13mm Thickness (Or ø28 x 13mm). Angle Shearing Capacity (At 90°): 80 x 80 x 8mm. Angle Shearing Capacity (At 45°): 50 x 50 x 6mm. Plate Shear Capacity 300 x 10mm. Notching Capacity 50 x 40 x 7mm. Bar Shear (Round/Square) 30 mm. Motor Power 2.2kW (3 HP)S/No. 3113. - LOT 8
![site]()
CMA Horizontal Belt Sanding Machine
Table Dimension L2,400 x 920mm. Motor 5.1kW. With Front Support Arms. - LOT 9
![site]()
Bema MG45R Pillar Drill
Rise & Fall Table Dimension 400 x 320mm (4 'T' Slots). Throat 217mm. Speed Range 105-1,500rpm (2.69kW Motor). Voltage 400V. - LOT 10
![site]()
Bema MG45 Pillar Drill
Rise & Fall Table Dimension 400 x 320mm (4 'T' Slots). Throat 217mm. Speed Range 105-1,500rpm (2.75kW Motor). Voltage 400V. - LOT 11
![site]()
Colchester Master 6 1/2 Gap Bed Centre Lathe
Ø255mm 4 Jaw Chuck. Centre Height 165mm. Distance Between Centres 850mm. Swing Over Bed Ø330mm. Swing Over Cross Slide Ø208mm. Spindle Bore Ø38.1mm. Speed Range 54-1,200rpm. - LOT 12
![site]()
Kearney & Trecker 205 C-12 Universal Milling Machine
Table Dimension 1,320 x 205mm (3 'T' Slots). Spindle Taper 50 International. Speed Range 37-1,575rpm. With Power Feed. - LOT 13
![site]()
Donaldson Torit DCE 2DFP4-SPRK Extraction Unit
Voltage 400V. Power 4kW. S/No. 11682680 (2017). - LOT 15
![site]()
- LOT 17
![site]()
- LOT 35
![site]()
Ø685mm (Ø108mm Bore) 4 Jaw Chuck & Cast Iron 'T' Slotted Angle Plate
Angle Plate Dimension W460 x D312 x H235mm. - LOT 36
![site]()
- LOT 37
![site]()
Mitre Electric Rod Oven
Overall Dimensions L470 x W470 x H470mm. Maximum Temperature 320°C. - LOT 38
![site]()
- LOT 39
![site]()
- LOT 45
![site]()
- LOT 3A
![site]()
Samsung SF20L LPG Forklift
Lifting Capacity 2,000kg. Maximum Lifting Height 3,700mm. Centre Of Gravity 500mm. With Rubber Tyres & Side Shift, S/No. MF22896827KF. Hours 5,596. - LOT 4A
![site]()
Power System Gtec 1510-500DF Rotary Screw Air Compressor With 500L Air Receiver
Power Output 15 kW (20 HP). Maximum Pressure 10 Bar (145 PSI). Air Delivery 65 CFM (1,850 L/min). Voltage 400V / 3-phase / 50Hz. Noise Level 65 dB(A). S/No. 396651001 (2018). Total Hours 24,4487, Load Hours 4,818.
Essential Information
General Information
- Auction Dates
- Starts: 04 August 2026 at 10:45 BSTEnds: 15 September 2026 at 15:00 BST
- Site Address
- 8-10 ELLINGHAM INDUSTRIAL CENTRE ELLINGHAM WAY ASHFORD KENT TN23 6NFUnited Kingdom
- Viewing Days
- By Appointment Only
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 21 September 2026 at 09:00 BST - 02 October 2026 at 16:00 BSTCollections strictly by appointment only
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
Please Select
BN11AL
United Kingdom info@apexauctions.co.uk+44 1273 224466